Datsun Lowrider  Modifications Review. The color is not less interesting. It's not black, but dark green. Therefore, the impression of elegance can be seen at a glance, but actually also in color.

Its body is dark berkelir diperkontras with the addition of chrome panels, ranging from front-rear bumper to the car's nose grille plus coconut shell lamp.

Making his body approached the ground is a challenging job for the owner who lives in Morioka, Iwate, Japan, this. By relying on the Firestone air suspension, it involves the T-Craft home modifications for the overall chassis construction, including the legs. The points modified in this section include springs, air bags for suspension, aluminum gallon, and compressors. Total, body, called Smooth 620 pickup was also down 6.4 inches than the original.

For the sake of impression "lowrider", cockpit bench was remade so impressed the passengers drowned. Hayato also embed all over his leather interior and plugging in audio devices of the alloy product Alpine, Rockford Fosgate, and Boyds.

Bodies lie down and then composed in contrast with the installation of wheels Eagle 17 x 8 inch models and spokes of a bicycle tire size 235/40R17. This is interesting for those who like to restoration. The material is a lot in the country. If you have and want to change it to be so, the Datsun was ascertained to be "on leave" from the routine of mutual sand.

source : kompas.com

READ MORE - Datsun Lowrider Modifications Review

Nissan R35 GT-R Modifications. Extreme modification done on the car with the engine spec VR38DETT, 3.799cc (3.8 L; 231.8 cu in) DOHC V6 this. GT-R is shown modified to increase the aerodynamic system. There was no detailed information about the GT-R, only on the brakes and suspension system using aftermarket goods, among others:

JRZ RS 1200/1000 pro coil overs running spring combo

Dodson front upper control arms

Dodson rear lower control arms

Stillen adjustable sway bars

Braided brake lines

PFC PFC rotors with pads

Willall brake master system

As for the rims, will get 10 Convace ADV.1 three-piece wheels with size 21x10.5-inch (front) and 21x12-inch (rear). While using Pirellis 295/25/21 tires (front) and 375/20/21 (rear), pretty extreme indeed.

source : okezone.com

READ MORE - Nissan R35 GT-R Modifications

 

Honda GL Chopper Version Review. Motor is the motor for men by adopting a fierce gas tank. For whom the street light when on, using 0.8 mm galvanized plate for motor body who've worn them. For the design of the tank, rear spakboard using size 0.8 mm galvanized plate, as well as the arm and the steering motor is dicustomnya.

Skull motif was chosen to remind all of them will be a skull. Want to be rich or poor all the same, both the driver and the vehicle we will be able to die if not treated properly.

Likewise with this chopper legs, front rim using Suzuki's ring 21 that blanketed with IRC tires sized 275/21 while the rear rim, bang Olo mengcustomnya with Landrover and wrapped rim owned property 180/60/16 Dunlop tires.

To add to the impression of stern, his custom drum front and to the rear using Honda's Tiger. Also aftermarket spare parts were embedded into the body of this chopper, such as by using a headlamp and lights sein variation and using the gas and clutch cables owned by Vespa.

source : detik.com

READ MORE - Honda GL Chopper Version Review

A minibus limousine Dodge in the 1970s are still around. Minibus or van is like walking because it is still recording inscriptions modification older style complete with murals of the popular Star Wars of its time.

Fuel injected V8 engine as an activator. However, gardannya only until the first rear wheel, like its original form. A sense of retro-style look at the opening gullwing doors or upwards, particularly for middle and rear doors.

The middle to the back of the cabinets are made ​​from stainless steel cabinet. Tail section was created for the fall-lying vacant. Inside there is also TV, video, video games, up to the microwave.

Problem tires, four in the back has a width of 10 inches with a brand BF Goodrich T / A radials, while the two tires on the front has a width of 8 inches with the same brand.

source : kompas.com

READ MORE - Modifications Dodge Limo Review

Motor combination of MotoGP and F1 Review. Honda Sabre Concept Switchblade was created by Edward Birtulescu from Honda R & D America, which took inspiration from the design of a motorcycle and car in Moto GP and Formula One.

Switchblade Sabre Basic Concept Honda is a Honda Sabre cruiser alert in 2010 that has been overhauled to become a new form.

It can be seen in almost all lines of motorcycle drag-racing to take the concept of this. Honda Sabre Switchblade Chassis Concept is made ​​new with a curved tank and seat single seater.

Moreover, this motor calipers also been used calipers commonly used in the racing arena. Motorcycle carrying VT 1300 cc engine is also more obvious thanks to the GPS application that can be used as a lap-timer.

The weight of this motor is decreased thanks to the application of carbon fiber in some parts of his body. Even the carbon fiber rim is also applied at the motor. This is not usually done because usually the use of alloy rims.

source : detik.com

See also :

Amphibious Corvette Sports Car Review And Video

Dubbed Dartz Prombron Iron L4P Ladies Only

Change Style Wrangler pickup

Chrysler 300 Touch of John Fortuño FatChance

Future motorcycle Collaboration 5 Students

READ MORE - Motor combination of MotoGP and F1 Review

Amphibious Corvette Sports Car Review And Video. In situations like that, you’ll likely turn to Watercar Inc., a company out of Fountain View, California, who have just the solution for you. Their Python vehicle reportedly can do 60 mph (~52 knots) in the water, turn a quarter mile in the mid-twelves and handle the 0-60 mph sprint in 4.5 seconds.

The Python starts as a… well, actually, we’re not sure, but we suspect that it starts from a custom boat hull and has Corvette parts added. You can see the rear bodywork of a Corvette in the photos, along with a jet drive for water propulsion. In the water, the road wheels retract to reduce drag, so there’s a lot going on under the bodywork, whether in the wet or dry. An LS powerplant drives both the road wheels and the jet pump.

Weighing in at 3800 pounds, the manufacturer claims a top speed (dry) of 125 mph. The Python is supplied as a rolling chassis, into which you’ll need to put an engine and transaxle. While the choice of engines seems open, the preferred gearbox comes from Mendeola Transaxles, in San Diego.

READ MORE - Amphibious Corvette Sports Car Review And Video

Dubbed Dartz Prombron Iron L4P Ladies Only. This car as the Safety Car Utility (SUC) as-plated steel and bulletproof. Trus, wheelbase (wheelbase) shorter than the standard. Some added luxury features, such as audio-video system, camera parking, two-color interior with leather choice of stars, ranging from snakes, alligators to whales.

Although weight increases, the Iron Ladies Only L4P can still skyrocketed, both in the asphalt or off-road terrain. Because the power the engine has 999 hp terdongkrak become, though not explained part dioprek.

Interestingly, given Dartz bonus if you buy "Ladies Only" this. Car buyers get a three pack "heaven" worldly, ranging from one kilogram bottle of Vodka and Caviar from RussoBaltique premium and a premium vibrator designed by Viktor Poontoos, an automotive designer.

Dartz only produce this car in limited numbers, only 10 units. Although there was no information on how bandrolnya, one unit was sold to Regina Abdurazakova, Kazakhstan royal princess who inherited wealth.

source : kompas.com

See also :

Change Style Wrangler pickup

Chrysler 300 Touch of John Fortuño FatChance

Future motorcycle Collaboration 5 Students

READ MORE - Dubbed Dartz Prombron Iron L4P Ladies Only

Jeep Wrangler,America is providing a new package called JK-8 Independence from Mopar. This jeep will appear in the East Safari in Moab Utah, United States that lasted 16 to 24 April.

Body kits provided by Mopar that can be done alone with two seats. Who's the back (bak) bsai used as a bed length of 50 inches and width is about 44 inches.

Mopar package offered includes the components and equipment required, such as the bed floor, inner and outer body panels, half the top (hardtop) and a new bulkhead.

Examples of modifications that have been done on the Jeep Jeep Scrambler CJ-8 made ​​in the 1980s. In the jeep, not only the body that replaced. The four 37-inch wheels memakain tires BF Goodrich KM2 Mud Terrarin. Then, fitted front axle 44 and rear Dynatrac ProRock Danas 44 with gear ratio of 4.88.

For the legs arm suspension kit fitted with a length of 4.5 inches, plus off-road bumpers front and rear 4x4.

Head of sales and marketing Mopar Jim Sassorossi said, for those who like to be a jeep and want to change the form, the process can be done on weekends.

source : kompas.com

READ MORE - Change Style Wrangler pickup

Chrysler 300 is one of the most popular car in America, is also among the modifiers. No wonder, when a production sedan at the Detroit-based manufacturer is made ​​custom to the flow of flat and if in Amerik called low rider.

Chrysler 300 which is called FatChance 2.0 superceper none other familiar names were taken from the modifier John Fortuño. This car will enliven the Annual Spring Festival LXs in California.

FatChance 2.0 300 has a prominent display on the exterior with body painted white. In addition to flat, the front of the modified model including the main light dark. Gril modified patterned lattice rather go into.

The figure of 2.0 FatChance Chrysler 300 looks more contrast combined with a combination of black and contained around the grille, mirrors, bumpers and logo lining.

All four wheels using R22 wheels wrapped in 255/30 size tires front and 295/25 rear. Unfortunately no mention, if all four legs equipped with air suspension.

source : kompas.com

READ MORE - Chrysler 300 Touch of John Fortuño FatChance

The idea of ​​modifying the two-wheeled vehicles such as would never-ending. This time 5 students majoring in design try to give you a wild idea that will make your eyes will not blink.

As reported by topspeed, Tuesday (29/03/2011), 5 students majoring in design of the Charles Edouard Berche, Ugo Spagnolo, Adrien Fuinel, Frederic Dobbelstein and Jean-Philippe Paries tried to make The Saline Bird concept.

In cooperation with the project include MDI for engines, Luxfer (water tanks) and BRM to realize that bird motor. As a beginner, they use a machine bertenologi compressed water. As for the fuel stored in three tanks with a capacity of 27 liters of air.

The position of the tank was placed on carbon-based body panels with coated with leather make this tank look conventional.

Not only that this brand-new vehicle has the appearance of two-wheeled vehicles such as the future, with a structure which is rather long and has a single seater with sweetener blue light. It seems these vehicles need to be taken into account if the correct form.

These students will be displaying his work at the arena ISD Valenciennes France this year as a design exercise for their final project. Unfortunately, they do not include how fast the vehicle is capable of running.

source : kompas.com

READ MORE - Future motorcycle Collaboration 5 Students